Complete Re-Gripping Kit For 14 Golf Clubs - With 8oz HF-100 Solvent

Brampton
SKU:
GA-GKIT-X14-236ML-W
£11.95
(77 reviews)
Weight:
350.00 Grams
Current Stock:
Adding to cart… The item has been added

The Complete Re-Gripping Kit - Everything You Need To Re-Grip Your Woods, Irons & Putter

Included in this re-gripping kit is everything a golfer will need to re-grip a complete set of golf clubs (14 clubs). 

Included: 

14 x Premium Double Sided Pre-Cut Grip Tape Strips 10” x 2”   

1 x Premium HF-100 Golf Grip Tape Solvent / Activator - 8oz (236ml)   

1 x Professional Rubber Vice Clamp Shaft Protector 

14 x Double Sided Pre-Cut Grip Tape Strips

Premium double-sided solvent activated grip tape strips - pre-cut to 10" x 2" for your convenience, thus saving re-gripping time.

These grip tape strips are used by PGA professionals, professional club fitters and golf club manufacturers throughout the world.

Specifications & Notes

Size:
25.4cm x 5cm (10" x 2")
Note:
The grip strips are designed to be slightly shorter in length than the golf grips - to prevent the need for trimming. 
Note:
Pre-cut strips have a backing film on both sides to prevent them from sticking together. Remove the backing film from both sides before applying solvent & fitting grips.

1 x Premium HF-100 Golf Grip Tape Solvent / Activator - 8oz (236ml Aprrox Enough To Re-Grip 14 Clubs)

Premium golf grip tape solvent – this product has been developed by Brampton Technologies Ltd.  This grip tape activator is a non flammable, non-toxic, non-ozone depleting, low VOC blend of surfactants, emollients, isoparaffins, and water.  HF-100 is completely ODC free and proper use can reduce VOC emission by up to 70%.

Engineered to have a slower evaporation rate HF-100 minimises ventilation requirements and is reusable.  When used as directed, HF-100 is very economical using 50% less than standard solvents. Appropriately called "The Grip Solution", HF-100 is odourless and colourless and works with any double sided grip tape.

Your golf grips will be playable in 10-15 minutes, without the need for any oven drying.

Remember, HF-100 golf grip solvent can be used time and time again and doesn't need to be disposed of after each re-grip.  

The Golf Grip Solution HF-100 Specifications

• Non-toxic

• Non-flammable

• Odourless

• Effective with all standard grip tapes

• Reusable

• Easy clean-up

• Economical - use half the normal amount to apply the golf grip 

1 x Professional Rubber Vice Clamp Shaft Protector

A vital piece of equipment for re-gripping your golf clubs, at a fantastic discount price.

A vinyl rubber construction, the Rubber Vice Clamp firmly secures the golf club shaft without any damage to the chrome or graphite finish of the shaft.

Get your re-gripping kit today from AdoreGolfGrips.com.

Reviews

Customers who liked this product said...

  • 5
    It sould be called easy grip

    Posted by Website Customer on 20th Aug 2014

    watched the video put the grips on it was that easy - great.

  • 5
    Easy to fit

    Posted by Kev on 1st May 2014

    Found the tape very easy to apply to the shaft as tape cut to lengths. Spray made it easier to apply solution and grips slipped on well with time to adjust the grip to centre.

  • 5
    First time re-gripping

    Posted by Bob on 25th Mar 2014

    My first time re-gripping and this kit was just spot on. I bought separately a table top vice (Screwfix) which just clamps on and with this kit managed easily to complete all my clubs. I did notice that the clubs which had been re-gripped by a local club had not used the strip tape just a thin tape wound at intervals. Clubs which had not been re-gripped had used the full tape so I think I did a better job than the my local club.

  • 5
    Tape and Solvent Kit

    Posted by Paul on 24th Mar 2014

    Ordered the 14 tape kit and larger activator with a set of nine grips (didn't want to mess up and wanted plenty of activator). Worked like a dream, would definitely recommend.

  • 4
    Good Product

    Posted by Richard on 10th Mar 2014

    This product works very well. The only misleading thing is the instructions on the solvent. It fails to explain that the double sided tape must have its outer covers removed before the grips can be fitted.