True Temper Vector Iron Shaft (90g-100g) - 0.370" Parallel Tip - Chrome
True Temper
£32.95
(No reviews yet)
Write a Review
True Temper
True Temper Vector Iron Shaft (90g-100g) - 0.370" Parallel Tip - Chrome
True Temper Vector Iron Shafts
Vector is a lightweight steel shaft line that alters handle stiffness, geometry and weight between the R and S flex. This creates optimised playing characteristics for each flex designation. The R-flex comes in an ultralight 90g model with a 0.580 butt diameter to promote easier shaft loading and increased wrist rotation through impact. The S-flex comes in a lightweight 100g model with a standard 0.600 butt diameter allowing for increased handle stability.
Vector Parallel Tip Iron Shaft - Trimming Instructions
The Vector 0.370" Parallel Tip Iron Shaft is a single length shaft that will be tip & butt trimmed to length, to make a shaft for a specific club.
Example: Building a set 4 Iron to PW
Order 7 units from this listing in the desired flex.
You will receive 7 identical full length shafts.
Follow the instructions in the Tip Trimming Guide below to tip & butt trim each shaft, to make a shaft for each specific club in the set.
Vector Parallel Tip Iron Shaft - Tip Trimming Guide
Please remember the following are general rules for assembling your clubs.
Butt trim shafts to finished length after tip trimming.
| 4i | 5i | 6i | 7i | 8i | 9i | PW |
| 0.5" | 0.5" | 1.0" | 1.5" | 2.0" | 2.5" | 3.0" |
Golf Shaft Specifications
- Brand:
- True Temper
- Model:
- Vector
- Club:
- Iron
- Colour:
- Chrome
| Flex | Weight | Clubs | Tip Diameter | Butt Diameter | Raw Length | Ball Flight | Trim Code |
|---|---|---|---|---|---|---|---|
| Regular (R) | 90g* | 4i - 9i, W | 0.370" | 0.580" | 40" | High | See Above |
| Stiff (S) | 100g* | 4i - 9i, W | 0.370" | 0.600" | 40" | High | See Above |
*Trimmed Weight
- Tip Size:
- 0.370" Parallel Tip
- Material:
- Steel
- Ball Flight:
- High
